When it comes to buying a 7 ¼-inch miter saw, there are various options available. Like Milwaukee and Dewalt, for example. But it is your job to choose the right one to get tasks done flawlessly.
So, here I provide a comprehensive guide on Milwaukee 7 1/4 miter saw vs Dewalt.
The quality of a miter saw depends on a few factors. For example, accuracy, precision, runtime, power, RPM, and so on. As for accuracy, Milwaukee provides the best result. It provides an RPM of 5000, whereas Dewalt offers 4100. For runtime and overall performance, Milwaukee stays ahead of Dewalt.
Still confused? Well, do not sweat. As in this article, I have elucidated each and every aspect in detail. Hence, made it way easier for you to compare the two and choose!
Read on!
A Brief Comparison of Milwaukee 7 1/4 Miter Saw VS Dewalt
In order to give you the most complete information possible, I’ve evaluated the Best miter saw.
Several categories, including Precision & Accuracy, and Performance (speed/power) are here. Also, Features, Ergonomics, Dust Collection, Decibels, and Price were used for this evaluation.
I will rate the saws for each of these criteria. Based on the total rankings, I will determine which is the Best Compact Cordless Miter Saw.
Precision and Accuracy– In this category, I assessed the miter saws’ accuracy. Right out of the box and their adjustability.
Performance – Cutting speed was used as a measure of the saw motor’s performance.
Run-time– Power of the saw motors and how effectively the saws handled repetitive cutting of framing lumber.
Features– They are compared to specifications as a whole.
Ergonomics – Users place a high value on ergonomics, making it a crucial factor to take into account. That is when buying any power equipment.
Dust collection is important. Because construction is a filthy profession and dust is one of the major risks.
We estimated the sound force level in decibels.
Here I have provided a snapshot of all these factors in brief. So, you can quickly have a glimpse at it.
Factors Dewalt Milwaukee
Runtime test 154 cuts 182 cuts
Battery Ah 4 Ah 5 Ah
Dust Collection 5.6 oz 7.5 oz
RPM 4100 5000
Ergonomics Average Excellent
So, there you go!
In-Depth Comparison
You have already gone through the brief comparison. In this excerpt, I am gonna discuss the factors in detail. And gonna differentiate between them.
Just like you would be comparing wood and metal bandsaw.
Read through the following.
1. Run-time Test
The process is about repeatedly cutting the KD timber for the run-time test. Until the battery ran out or thermal overload made it impossible to continue.
The saw was to be started and brought up to speed by the operators. Advance the saw, make the cut, let the blade stop, reset, and do it again.
In this test, the Dewalt miter saw made 154 cuts.
Whereas, the Milwaukee miter saw made a whopping 182 cuts.
Winner: So, our clear winner here is the Milwaukee 7 ¼-inch miter saw.
2. Ergonomics Evaluation
The testing team’s opinions served as the sole basis for the evaluation of ergonomics here. Running performance tests is how it is done. the saws were evaluated and ranked in seven categories.
These include Bevel adjustment, Miter Adjustment, grip, switch, Fence Adjustment, and Balance.
Each saw is weighed, loaded, and unloaded into a work van. Transport is a substantial aspect you are gonna want to take into consideration. Before you commit to any new saw.
After weighing down the difference between Milwaukee and Dewalt, the first one scored the best.
The manufacturing quality of Milwaukee was great. Also, Its design is detailed, trendy, and very well made.
Winner: So, once again the clear winner, in this case, is the Milwaukee miter saw.
3. Dust Collection
Knowing how well saws will function in a vacuum is a crucial performance indicator for users.
Everyone wishes to confine the quantity of airborne dust in the surroundings.
By making 25 cuts on a 2×6 piece of KD timber, you may test the dust collection system. That is, by measuring how much wood dust the vacuum gathers after each cut.
I also evaluated the accumulation of dust on the tool’s table and fence. And the latter wasn’t able to enter the vacuum.
Milwaukee won the competition by collecting 7.5 ounces of dust.
Though Milwaukee miter saw has some problems of its own.
However, When it comes to collecting dust, it is amazing.
And the Dewalt did terribly.
This occurred since when that dust extractor was turned on, those rubber flaps collapsed.
While cutting or removing these flaps there’s a simple field modification. Dewalt really needs to address this.
Winner: So, in terms of collecting dust, Milwaukee is the winner!
4. Decibels
More and more contractors are protecting their hearing these days.
8 hours of exposure to noise levels up to 90 dB is allowed.
While exposure restrictions for noise levels 95 dB and higher are drastically reduced.
These saws all obviously require hearing protection.
Along the two, the Milwaukee saw was the quietest, with a decibel level of 84.
However, it was closely followed by the Dewalt saw at 87.
Winner: So, in terms of quietest saw, Milwaukee wins the game in this case as well.
5. Miter Saw Accuracy and Precision
When possible, the saws were equipped with Milwaukee 60-tooth blades to maintain uniformity.
When purchasing a miter saw, many buyers will immediately open the shipment box. And start using the tool.
I can think of farmers or other artisans who are not very concerned with correctness.
Other users, on the other hand, will be very concerned with the accuracy of their new saw. And like adjusting it to almost perfection.
A finish carpenter or woodworker must constantly examine and maintain a miter saw’s ability.
To make a precise cut is needed. Because even a slight misalignment can result in compounding errors on a job.
We examined the saws’ calibration right out of the box and made notes about what we discovered. And then calibrated while taking note of how challenging it was to get them tuned up.
A change of just 1° over a 1-inch span will generate a 1/64-inch gap in the finished miter joint. Making miter saw calibration a crucial step. Similar
to this, a 3° across a 5-inch span results in a 9/32-inch gap.
Seems complex. Well, at least not like the 7/32 vs 13/64 chainsaw file.
I wanted to show readers how accurately the saws performed immediately out of the box.
The following factors were explored.
- Miter accuracy
- Bevel accuracy
- The flatness of the fence
- The flatness of the table
- Crosscut accuracy set to 90
Milwaukee showed up in first place with a score of 14 points.
Dewalt scored around 13 points.
Winner: So, in terms of the accuracy and the precision of your miter saw. The preference should be Milwaukee.
Which One to Choose?
So, you have already gone through the detailed idea.
So, I bet you have observed how in every factor. Be its accuracy, precision, or runtime- Milwaukee wins the game.
Also, it provides the quietest work which is what everyone desires.
On top of that, it collects the most dust which makes the job easier. And lastly, it equips the most power and overall extraordinary performance. Much greater than Dewalt Miter Saw.
So, if you want our recommendation, it would be Milwaukee.
FAQs
Does Milwaukee make a quality miter saw?
Yes, it does. This saw has an outstanding cutting capacity. And several manufacturers have found ways to extend both vertical and horizontal cuts. The Milwaukee miter saw will cut the base crown up to 5 ¼ inches. That is against the fence. Plus, the height would be 5 ¾ inches.
Which miter saw is the most precise?
One of the best, slickest, and most detailed miter saws is the Metabo HPT 7-1/4′′ saw. Although it is more expensive. It is unquestionably justified for woodworkers and carpenters who require portability.
Can a 4×4 be cut on a 7 14″ miter saw?
A circular saw’s 6.5-inch or 7.25-inch blade won’t be able to neatly cut through a 4×4 as a miter saw. That is, with a blade shorter than 12 inches. Most circular saws happen to possess an utmost depth of only 2.5 inches.
How much wood can a 12-inch miter saw cut through?
There are 12-inch types available, with an utmost cut width of approximately 7 1/2 inches. And a width of 2 by 8. This larger saw is able to cut through 4×4. That is with a thickness of 3.5 inches.
Wrapping Up
Hope I have cleared your confusion of Milwaukee 7 1 4 miter saw vs Dewalt.
Now you know about both of these tools in detail. And have already, hopefully, compared the two. You may go for the suggested one. If not, then use your own requirements to decide which one is better for you.
This is all for now. Have an awesome day!
- 5/16 Tap Drill Bit Size (Everything You Need to Know) - July 16, 2023
- Ryobi HP Battery vs Non-HP (Unveiling The Power Difference) - July 14, 2023
- Table Saw Blade Thickness (The 360 Guidelines) - April 27, 2023